Finishes: PolishedBrass, Satin Nickel & Vintage Bronze

Fits standard size doors

Replaces most deadbolt strikes for increased security

Strengthens or repairs wood jambs

3 screws attach to wall stud for extra security

Dimensions: 1-1/4 x 6

Door Thickness: All

Instructions:
1. Remove old strike.
2. Position new strike in place and mark the two mounting holes on the side of the strike away from the door jamb. Chisel out area behind strike if needed or if a flush fit is desired.
3. Drill 1/8 pilot holes 1 deep. Install small screws.
4. Close door and operate lock. If lock operates correctly, drill remaining two pilot holes with a 1/8 drill bit 2 deep. Install long screws. If lock does not operate correctly, reposition strike place and retest.